::: Fabelec :::

Maxstream: Radio Modems Solutions Fabelec presents a complete range of Radio Modems orientated to the wireless communication. The recognized quality and efficiency of the Maxstream's products them emphasizes on the market of the communication in RF.

		XBee / XBee-Pro -ISM 2.4 GHz operation frecuency -XBee: 2 mW (+3 dBm) power output (up to 300 ft / 90 m RF LOS range) -XBee-PRO: 63 mW (+18 dBm) power output (up to 1 mile / 1.6 km RF LOS range) -RPSMA connector, U.FL connector, Chip antenna, or Wired Whip antenna -Industrial temperature rating (-40° C to 85° C) -Approved for use in the United States, Canada, Australia and Europe -Low-power modes supported Download Datasheet

		XCite The 9XCite 900 MHz RF modem provides excellent range (up to 1000 feet) in a low-cost wireless solution. The modem resides in an anodized aluminum enclosure. Pin, serial port and cyclic sleep modes are available for power-sensitive applications. This affordable RF modem outperforms others costing hundreds of dollars more and is approved for use in North America, Australia, Israel and many other countries. -ISM 900 MHz operating frequency -4 mW power output (up to 300m range) -Commercial (0° C to 70° C) or Industrial (-40° C to 85° C) temperature rating -FCC/IC approved -Low-power modes supported Download Datasheet

		XPress -Indoor/urban range up to 2,000 feet (with high gain antenna) -Outdoor line-of-sight range up to 15 miles (with high gain antenna) -Does not interfere with Wi-Fi networks -900 MHz Band frequency The XPress Ethernet Bridge replaces costly wiring with a solution that wirelessly connects many devices. The XPress Ethernet Bridge is the best solution when: -Wi-Fi range is insufficien -An Ethernet cable drop will cost too much or is impractical to install -Low latency for voice or video is required (VoIP/PTZ cameras) -An industrial, long-range Ethernet bridge is required The XPress Ethernet Bridge is available either as a point-to-point matched pair (two modems) or a multipoint transceiver. The point-to-point model is ideal for a pplications needing to wirelessly connect only two Ethernet devices. If the application requires (or in the future might require) connecting more than two Ethernet devices, the multipoint model is an excellent option. Download Datasheet

		XStream -Indoor/urban range up to 1500 feet -Outdoor line-of-sight range up to 20 miles (with high gain antenna) -7 frequency hopping channels, each with 65K available addresses -Outstanding receiver sensitivity (-110 dB @9600 bps) -Modems can be configured in minutes to provide low-cost serial cable replacement between all types of electronic devices. Available in 900 MHz and 2.4 GHz models, XStream-PKG modems provide transmission ranges of up to 20 miles in a low-cost wireless solution. The modems are coupled with a DIP-switchable RS-232/422/485 interface board and regularly outperform more expensive RF modems. Their outstanding receiver sensitivity enable XStream-PKG modems to yield two- to eight-times the range of competing modems, allowing customers to cover more ground with fewer devices. Available in a variety of data interface options, including RS-232/422/485 serial, USB and telephone Download Datasheet

		XTend -Indoor/urban range up to 3000 feet -Outdoor line-of-sight range up to 40 miles (with high gain antenna) -Outstanding receiver sensitivity (-110 dBm @9600 bps) -Adjustable power output from 1 mW to 1 W Modems provide everything you need for out-of-the-box serial cable replacement, enabling quick wireless connectivity of electronic devices across a broad range of applications. Simply feed data into one modem and the data is transported to the other end of a long range wireless link. The modems support an extensive set of AT and binary commands. With superior receiver sensitivity, XTend modems hear what others can't, yielding two- to eight- times the range of competing RF modems. This allows customers to cover more ground with fewer transceivers, reducing the cost of deployment. And with no configuration required, complexity is minimized. Available in multiple interface options, including RS-232/422/485 and USB, XTend modems are ideally suited for remote monitoring, building automation/security, industrial automation/SCADA, fleet management/asset tracking and sensor data capture. Download Datasheet

For more information visit the MAXSTREAM web site